COMPARISON OF FORCED- AND FREE-OSCILLATION CFD METHODS FOR CALCULATING PITCH DAMPING COEFFICENTS OF FINNED SUPERSONIC PROJECTILES
Abstract
This paper presents a free-oscillation CFD methodology for evaluating pitch damping coefficients of finned supersonic projectiles and compares it to the forced-oscillation CFD method across a range of Mach numbers spanning the subsonic, transonic, and supersonic regimes. Pitch damping coefficient results from both methods were compared to published experimental results and semi-empirical code (PRODAS) results. Good agreement between the two CFD methods was observed in the transonic and supersonic regimes, while a notable discrepancy was found in the subsonic regime, which is attributed to differences in the excitation mechanisms and the sensitivity of the free-oscillation approach to transient flow-field history effects. The study made use of the open-source CFD package HELYX developed by ENGYS. The density-based coupled solver was used, and the analysis was done using the Army Navy Basic Finner.
DOI
10.12783/ballistics26/37603
10.12783/ballistics26/37603
Refbacks
- There are currently no refbacks.