REVIEW OF IN-RANGE MEASUREMENT TECHNIQUES FOR PROJECTILE AERODYNAMIC COEFFICIENTS
Abstract
Accurate prediction of projectile trajectories is essential for achieving precise ballistic targeting. Such predictions rely heavily on the accurate determination of the projectile’s aerodynamic coefficients. These coefficients can be obtained through computational fluid dynamics (CFD) simulations, wind-tunnel testing, or in-range experiments, the latter being the focus of this review. In-range measurements can be performed using ground-based instrumentation. Doppler radars provide measurements of projectile velocity and spin rate, while yaw cards enable the determination of yaw angles at discrete positions along the trajectory. Spark ranges offer additional information by capturing the projectile’s position and attitude throughout its flight. Alternatively, measurements can be obtained from onboard instrumentation integrated within the projectile. These systems typically employ a combination of accelerometers, gyroscopes, magnetometers, and Global Navigation Satellite System (GNSS) receivers. The collected sensor data are used to reconstruct the projectile’s trajectory and attitude history with high accuracy. Once the experimental data have been acquired, aerodynamic coefficients can either be estimated directly from the measurements or identified through trajectory-matching techniques. In the latter approach, a trajectory model is fitted to the measured data using parameter estimation methods such as cost-function minimisation, maximum-likelihood estimation, or Extended Kalman Filtering.
DOI
10.12783/ballistics26/37612
10.12783/ballistics26/37612
Refbacks
- There are currently no refbacks.