STUDY ON THICKNESS SHRINKAGE MODEL DURING THE CASTING AND DRYING OF NITROCELLULOSE FILMS
Abstract
As a critical charge component, precise control of the thickness of nitrocellulose (NC) films determines its energy release and ballistic performance of propelling charge. However, in practical industrial production, precise control of thickness uniformity during the film formation process remains challenge due to solvent evaporation behavior and fluctuations in equipment operating conditions. In this study, laboratory- scale casting and drying experiments were conducted under different processing conditions. Based on the experimental data, a drying process thickness shrinkage model was developed by introducing equivalent drying intensity and a line-speed correction term to characterize the influence of coupled processing parameters on the average thickness evolution of laboratory-prepared NC films. The model results demonstrated that the proposed model achieved a coefficient of determination (R2) of 0.9121 under eight independent process states, with RMSE and MAE values of 0.001510 mm and 0.001171 mm, respectively, indicating that the model can effectively describe the average thickness evolution of NC films under different drying states. The model developed in this study provide preliminary predictive capability for the thickness shrinkage behavior of NC films during the drying process under different processing conditions, offering technical support for processing parameter optimization and improvement of thickness uniformity control.
DOI
10.12783/ballistics26/37628
10.12783/ballistics26/37628
Refbacks
- There are currently no refbacks.