PERFORMANCE TESTING OF METALLISED ACRYLONITRILE BUTADIENE STYRENE (ABS) HYBRID ROCKET FUEL GRAINS
Abstract
Flamengro designed, manufactured and assembled a hybrid rocket motor for an initiative into propellant replacements for the ITAR-controlled Hydroxyl Terminated Polybutadiene (HTPB) fuel. The primary objective was to investigate the use of additive manufacturing technologies in fuel grains for hybrid rocket and ramjet propulsion systems using metallised acrylonitrile butadiene styrene (ABS). The first phase involved the design, modelling and simulation of the fuel grain and HBR motor. The second phase demonstrated this technology through live-fire testing at Flamengro's dynamic testing laboratory. The results showed that an ABS/aluminium (10 %) fuel grain had a 35.70 % higher regression rate than pure ABS grains and a 67.5 % higher regression rate than HTPB reported in literature. Building on these results, the third phase focuses on the design and integration of a De Laval nozzle into the existing motor to enable thrust and specific impulse measurement. The nozzle employs a dual-material construction, comprising a stainless steel 304 outer body and a replaceable graphite throat insert, and is sized for nominal operation at 10 bar chamber pressure with 15 bar and 20 bar variants. The nozzle is projected to increase motor thrust from approximately 1 N to between 46 N and 53 N, enabling meaningful performance data to be collected in the next test campaign.
DOI
10.12783/ballistics26/37643
10.12783/ballistics26/37643
Refbacks
- There are currently no refbacks.