EVALUATION OF ACCURACY AND GEOMETRIC OPTIMISATION IN THE DESIGN OF TRIPLE BASE PROPELLANT GRAINS FOR 155 MM ARTILLERY SYSTEMS
Abstract
This study evaluates the accuracy and suitability of various design tools, thermodynamic models and traditional charge design methods for triple-base propellant grains. Practical measurements compared theoretical and real values across parameters such as thermochemical character, density and physical extrusion dimensions. Grain geometries tested included seven- and nineteen-perforation rosette, round, and hexagonal configurations, with variations in length-to-diameter ratio and web thickness. A design framework was established for evaluating surface regression and form-function characteristics using mesh-based (Blender) and analytical (Solid Edge and IBWB-0D) modelling approaches, with predictions evaluated alongside closed-vessel combustion experiments. Additionally, the ICT thermodynamic code was used to calculate absolute force and these predictions were compared with experimental results obtained from closed-vessel tests. The results demonstrate that while Blender provides exceptional 3D visualization and an independent physical check of burning surface regression, its quantitative accuracy is heavily mesh-dependent due to geometric discretization errors that accumulate during regression. To address this, a mesh density analysis was conducted to establish guidelines for balancing visual modeling fidelity and computational speed. Furthermore, a systematic comparison of thermochemical calculations shows a consistent positive force offset (+80 to +109 J/g) in the ICT thermodynamic predictions relative to closed-vessel force measurements, highlighting the impact of idealized, adiabatic assumptions and experimental heat loss. These findings provide practical guidelines for selecting and combining digital modeling and experimental tools to improve design reliability for next-generation propelling charges.1
DOI
10.12783/ballistics26/37646
10.12783/ballistics26/37646
Refbacks
- There are currently no refbacks.