BLAST IMPULSE REDUCTION USING MITIGATING MEDIA
Abstract
Experiments were conducted to characterize and quantify blast impulse reductions using two-phase (solid-gas) media. Impulse reductions exceeding 40% were achieved compared with baseline tests without mitigating media and with both CTH hydrocode- and CONWEP-predicted values. An explosive charge was detonated in the geometric center of 51 cm x 51 cm x 51 cm kraft paper boxes for each test. Pressure measurements were made at 1-meter and 2-meter distances from the explosive charge surface. Peak overpressure and impulse were derived from pressure-time data. High-speed video and stillphotograph captures documented the events. Mitigating media either were placed in panels affixed to the vertical surfaces of the boxes or in concentric cardboard tubes surrounding charges. Mitigating media tested were expanded vermiculite, aerogel/fiber blankets, and 2–3 mm diameter polystyrene foam spherical beads. Phase-change materials were also tested to determine if enthalpic absorption of blast energy could occur within intense-blast timescales.
DOI
10.12783/ballistics26/37658
10.12783/ballistics26/37658
Refbacks
- There are currently no refbacks.