EFFECT OF DETONATION POINT ON BLAST LOADING OF CUBOIDAL-SHAPED EXPLOSIVE: NUMERICAL STUDIES
Abstract
The current design practice considers blast load based on the empirical expressions of Kingery and Bulmash, which are best applicable for center-detonated spherical and hemispherical shape explosive. However, the explosive shape and detonation point substantially influence the distribution of chemical energy release as a result of direction-dependent blast load. This study numerically examines the blast loads (peak overpressure and impulse) of a cuboidal shape explosive with different detonation points. The shape factor is defined as the ratio of the blast load from a non-spherical explosive to that from a spherical explosive, used to evaluate the spatial distribution. There is large variation (0.5-3.8) of the shape factor across different directions for different detonation points over scaled distances ranging from 0.4 to 1.0 m/kg 1/3. These analyses highlight the effect of detonation point in the spatial distribution of blast load and need to be considered in protective design.1
DOI
10.12783/ballistics26/37683
10.12783/ballistics26/37683
Refbacks
- There are currently no refbacks.