INFLUENCE OF WAVE SHAPER STRUCTURE ON DETONATION WAVE AND FORMATION OF DUAL-MODE SHAPED CHARGE
Abstract
The wave shaper is the key structural component that governs mode transition in PELE/EFP dual-mode warheads. To clarify the influence of wave-shaper structures on detonation-wave evolution in shaped charges and on PELE/EFP formation, an analytical model for the detonation-wave profile of shaped charges with a wave shaper was established by incorporating the run-to-detonation behavior of the inner explosive. Combined with numerical simulations and experimental validation, this study analyzes the effects of different wave-shaper structures on detonation-wave propagation and on the formation of PELE/EFP. The results indicate that the proposed model agrees well with numerical simulations, with relative errors in the angle between the wavefront and the axis remaining below 10%. A concave wave shaper significantly reduces the angle between the wavefront and the charge axis. Although further increases in concavity exert only a limited influence on PELE, they markedly improve the aspect ratio and flight stability of the EFP.
DOI
10.12783/ballistics26/37688
10.12783/ballistics26/37688
Refbacks
- There are currently no refbacks.