Open Access Open Access  Restricted Access Subscription Access

PARAMETRIC STUDY AND EXPERIMENTAL VALIDATION OF ALUMINUM-LINED CYLINDRICAL SHAPED CHARGES

Gengyan (Larry) Liu, Rachel Bauer, Catherine Johnson

Abstract


Cylindrical shaped charges (CYSC) produce non-stretching jets at twice the detonation velocity with jet length scaling with liner length. Prior literature has identified significant obstacles to their practicality, including supersonic stagnation-point collision, jet evaporation, and liner tolerance constraints. This work presents a parametric numerical study using ANSYS Autodyn and LS-DYNA, varying liner outer radius and mass for aluminum 6061 liners with Composition B. Simulations produce jets even when collapse velocities exceed the ambient bulk sound speed, where stagnation pressures reaching approximately 93 GPa raise the Hugoniot-derived sound speed well above the collapse velocity. Three preliminary experiments using Texpak binary explosive and aluminum liners produced 68–70 mm of penetration into mild steel from 165.1 mm charges. The penetration depth and roughly symmetric cavity profiles are inconsistent with a vaporized or fully dispersed jet. Recovered solid slugs formed as predicted by Pugh–Eichelberger–Rostoker (PER) theory.


DOI
10.12783/ballistics26/37693

Full Text:

PDF

Refbacks

  • There are currently no refbacks.