PERFORMANCE CHARACTERIZATION OF AN EXPLOSIVE BRIDGEWIRE DETONATOR USING ELECTRICAL AND OPTICAL MEASUREMENTS
Abstract
An exploding-bridgewire (EBW) detonator offering high safety against accidental triggering is designed and characterized. The head couples a gold bridgewire to a two-layer secondary-explosive column, an unpressed PETN layer followed by a pressed RDX output pellet, confined in a Ø 7 mm brass sleeve. Initiation is delivered by a purpose-built firing set producing a kilo-ampere transient through a spark-gap switch (20 μF, 1200 V). Each shot is analysed by acquisition of the discharge current, digitized at 2.5 GSa/s, and the luminous emission on four optical channels. The function time, taken as the plasma-flash peak, coincides with the current collapse at bridgewire vaporization. Over ten prototypes, the mean function time is 31.97 μs and σ = 1.61 μs (n = 10), falling to 0.96 μs for the seven closest units. Both values lie roughly three times below the 5 μs qualification threshold; the intrinsic head function time is 8-12 μs.
DOI
10.12783/ballistics26/37701
10.12783/ballistics26/37701
Refbacks
- There are currently no refbacks.