FEA METHOD FOR PRELOAD APPLICATION IN PROJECTILES DURING GUN LAUNCH
Abstract
The survivability of projectiles during the intense conditions of gun-launch is frequently evaluated using modeling and simulation. As new projectile designs incorporate more threaded joints, failures at these connections have become a concern. To mitigate such failures, it is essential to develop an accurate Finite Element Analysis (FEA) model that can simulate the dynamic mechanical environment inside the gun barrel. A significant challenge in these simulations is the accurate modeling of preload in threaded joints. This paper introduces a new FEA method developed for Abaqus Explicit to better assess projectile survivability by more accurately representing preload. This technique enhances the understanding of how complex munition assemblies respond to the dynamic forces of gun launch. The method is demonstrated using a simulated test article (TA) that represents a threaded joint from a developmental projectile. FEA simulations were conducted, beginning with an applied torque of 625 ft-lbf (847 Nm) on the TA. The validation of this FEA method through physical testing of the TA is detailed in a separate companion paper by Tesla et al., titled “Validation of the FEA Method for Preload Application in Projectiles During Gun Launch.”.
DOI
10.12783/ballistics26/37706
10.12783/ballistics26/37706
Refbacks
- There are currently no refbacks.