DYNAMIC NUMERICAL SIMULATION OF THE RAMMING AND ENGRAVING PHASE IN LARGE-CALIBRE ARTILLERY SYSTEMS
Abstract
This paper presents a dynamic finite element simulation of the ramming phase of a 155 mm projectile in a large-calibre artillery system, modelling the projectile, rotating band and barrel in Abaqus Explicit. Ramming speeds of 6 to 10 m/s and nose-up insertion angles of up to 0.4 mrad were investigated. The forcing cone strongly self-aligned the projectile during seating. Every case came to rest within 0.25 mrad of the bore axis, and the deliberate misalignments were rotated out as the band engaged the cone. Peak decelerations rose from about 254 kN to 453 kN across the speed range, yet the resting condition was essentially unchanged. The contribution of ramming variation to the exit angle is therefore expected to be small compared with the uncertainty carried by the modelling assumptions, in particular the band-to-bore friction coefficient and the rotating band material model.
DOI
10.12783/ballistics26/37711
10.12783/ballistics26/37711
Refbacks
- There are currently no refbacks.