Open Access Open Access  Restricted Access Subscription Access

STUDY ON RESIDUAL VELOCITY CHARACTERISTICS OF TUNGSTEN ALLOY SPHERICAL FRAGMENTS PENETRATING METAL TARGETS

Yi Chen, Xudong Gao

Abstract


Based on ballistic impact test results, a finite element model was established and validated for the penetration of 616 armor steel by 93W4Ni3Fe tungsten alloy spherical fragments. To distinguish different failure criteria, two critical velocities were defined: Vplug, the ballistic limit velocity corresponding to plug ejection only, and Vproj, the ballistic limit velocity corresponding to fragment exit with a positive residual velocity. The results show that Vplug increases with increasing thickness-to-diameter ratio and impact obliquity. Under 20° and 40° oblique penetration conditions, the average increases in Vplug are approximately 5.9% and 34.8%, respectively, reflecting the effect of the equivalent penetration path and additional asymmetric energy dissipation at larger impact obliquity. The fragment velocity-retention ratio increases with increasing impact-velocity multiplier but decreases with increasing target thickness. Vproj is generally higher than Vplug, and the difference between them decreases as target thickness increases.


DOI
10.12783/ballistics26/37717

Full Text:

PDF

Refbacks

  • There are currently no refbacks.