STUDY ON THE LETHAL EFFECTS OF THE ACTION SEQUENCE OF FRAGMENTS AND SHOCK WAVES ON HUMAN HEAD TARGETS WEARING BALLISTIC HELMETS
Abstract
This study first validated the numerical model of the ballistic helmet through bullet impact experiment, and verified the accuracy of the head model using cadaver head experiments and shock tube experiments. Subsequently, numerical simulations were conducted to investigate the lethal effects on a human head-neck target wearing a ballistic helmet under different sequential combinations of fragment and shock wave loading. The results indicate that the stress distribution in the brain under the coupled action is dependent on the loading sequence. Furthermore, the combined damage effect is not equivalent to the simple superposition of individual injury effects caused by the shock wave and the fragment. When fragments penetrate the helmet prior to the shock wave, the wave will flow through the pores, producing a shock-focusing effect that elevates intracranial pressure (ICP) and exacerbates traumatic brain injury (TBI). The impact sequence of fragments and shock waves affects the back face deformation (BFD) of the helmet. When the fragments act on the helmet first, the maximum deformation value is 12.2 mm; when the shock waves act on the helmet first, the maximum deformation value is 9.6 mm; and when both act simultaneously, the maximum deformation value is 10.59 mm.
DOI
10.12783/ballistics26/37719
10.12783/ballistics26/37719
Refbacks
- There are currently no refbacks.