EQUIVALENT STEEL THICKNESS APPROACH FOR MODELING UHMWPE SOFT ARMOR: AN EXPERIMENTAL AND NUMERICAL STUDY
Abstract
This study investigates the concept of equivalent steel thickness for modeling hybrid ballistic armour systems compose of Armox® steel and UHMWP (Dyneema®) laminates. Experimentsl ballistic tests and validated LS-DYNA numerical models were developed to characterize the respons of both materials under projectile impact. Hybrid configurations with varying steel thicknesses (2-6mm) and Dyneema® layer counts (8-25) were analysed at impact velocities of 400, 600, and 800 m/s. Results show that increasing Aromox® thickness has the greatest influence on rducing projectile residual velocity, while Dyneema® provides complementary energy absortion through fibre stretching and delamination after the projectile is decelerated by the steel. Internal energy analyses reveal a clear interaction between both materials, demonstrating their complementary roles in ballistic protection The study concludes that 1 mm of Armox® steel provides an approximate ballistic improvement equivalent to 8-10 Dyneema®layers, offering a practical first-order guideline for designing and medelling hybrid armour systems.
DOI
10.12783/ballistics26/37723
10.12783/ballistics26/37723
Refbacks
- There are currently no refbacks.