DEFEATING MODERN ERA: DESIGN AND ANALYSIS OF A NON-INITIATING TANDEM WARHEAD
Abstract
This study presents the design and experimental validation of a tandem warhead incorporating a non-initiating precursor for defeating modern explosive reactive armor (ERA). Conventional tandem systems rely on precursor-induced detonation of the ERA; however, the resulting motion of the flyer plates can significantly disrupt the main jet. To overcome this limitation, a non-initiating precursor was designed through numerical analysis to perforate the frontal armor plate without initiating the reactive cassettes. The design was validated through precursor unit tests followed by static penetration tests of the integrated tandem system. The experimental results confirmed non-initiating perforation under all test conditions, enabling the main jet to pass through the pre-formed aperture without significant disturbance. The proposed configuration also exhibited less degradation in residual penetration capability than conventional ERA-initiating systems. These results demonstrate the potential of the non-initiating tandem warhead concept to defeat advanced reactive armor while preserving the penetration performance of the main warhead.
DOI
10.12783/ballistics26/37731
10.12783/ballistics26/37731
Refbacks
- There are currently no refbacks.