Open Access Open Access  Restricted Access Subscription Access

ADVANCING MILITARY HELMET PADDING SYSTEMS FOR TRAUMATIC BRAIN INJURY MITIGATION THROUGH INNOVATIVE MATERIALS DESIGN AND TESTING

Daniel Portillo, Alireza Abbasi Ghiri, Scott Barclay, Chris McGarry, Brett Deffner, James Mathis, Alexander Carpenter, Morteza S Seidi

Abstract


This study introduces a Buckling-Driven helmet padding architecture composed of interconnected pre-curved polyurethane columns designed to control deformation and redistribute localized ballistic loads. Its helmet-level performance was compared with two commercially available foam systems and one lattice-based system. Ballistic testing was conducted under NIJ Level III-A conditions and impacts were applied at the front, side, and rear of MICH helmets mounted on an instrumented Hybrid III head–neck assembly. Various engagement conditions were evaluated, and performance was quantified using peak linear acceleration (PLA), Head Injury Criterion (HIC), peak angular velocity (PAV), and the DAMAGE metric. The Buckling-Driven architecture reduced PLA by 17%–33% and HIC by 25%–62% relative to the foam- and lattice-based systems. Favorable PAV and DAMAGE responses were also recorded across various module-engagement conditions and impact locations. These findings demonstrate that controlled buckling and geometry-driven load redistribution can improve ballistic impact attenuation in combat helmet padding.


DOI
10.12783/ballistics26/37733

Full Text:

PDF

Refbacks

  • There are currently no refbacks.