COMPARISON OF THE TERMINAL BALLISTICS EFFICIENCY OF HIGH HARDNESS STEELS AND TITANIUM BASED ALLOYS
Abstract
The paper presents an investigation into the terminal ballistic efficiency of high-hardness steels, with thicknesses ranging from 5 to 10 mm, and a hardness of 500HB, subjected to impacts by varying projectile geometries (flat-nosed and pointed-nosed hardened steel cores). Significant variations in ballistic performance were observed between the two impactor types, manifested in distinct failure modes of both the target and the projectile, as well as notable differences in ballistic limit velocities. The experimental results were compared with the performance of previously tested Armstal 500 steel and titanium-based alloys, which are characterised by high strength-density ratio. A comparative analysis of the ballistic performance of rolled Ti6Al4V plates against the investigated steel plates demonstrated that titanium-based materials offer comparable efficiency, suggesting their viability as a lightweight alternative in ballistic protection applications.
DOI
10.12783/ballistics26/37735
10.12783/ballistics26/37735
Refbacks
- There are currently no refbacks.