HYBRID TECHNIQUE FOR MANUFACTURING LAYERED TITANIUM-BASED STRUCTURES AND PRELIMINARY IMPACT TESTING
Abstract
This paper evaluates a novel hybrid laser treatment for manufacturing layered titanium-based Ti6Al4V (Ti64) structures designed for ballistic protection. To address the moderate hardness and susceptibility to plugging failure of pure Ti64, this technique introduces carbide-based additives directly into the front surface of a rolled base plate. This surface modification aims to shatter hardened steel penetrators and alter target loading characteristics. The method ensures strong metallurgical bonding with minimal geometric distortion, effectively eliminating common drawbacks of classical additive manufacturing, such as porosity and the need for hot isostatic pressing (HIP). The treatment significantly increased the strike face hardness to 780 HV (up from 380 HV in the base layer), matching the typical hardness of hardened steel armour-piercing projectile cores (approx. 750-800 HV). Preliminary terminal ballistic tests demonstrate highly promising results for applying this technique to produce protective structure strike faces.
DOI
10.12783/ballistics26/37742
10.12783/ballistics26/37742
Refbacks
- There are currently no refbacks.