Open Access Open Access  Restricted Access Subscription Access

DAMAGE EFFECTS OF Ni-Al REACTIVE JETS AGAINST TYPICAL UNDERWATER TARGETS

Tianchu Wang, Qiang Zhou, Chuan Zhao, Shouren Wang, Pengwan Chen

Abstract


To overcome the limitations of traditional inert shaped charges in damaging underwater targets, Ni-Al reactive materials, which combine kinetic energy penetration with subsequent chemical energy release, offer a promising solution. The Ni/Al molar ratio is a critical parameter governing the material's reaction behavior and energy output; however, its specific influence on the damage effects of reactive jets against different underwater targets remains unclear. In this study, Ni-Al reactive liners with different molar ratios (1:1, 3:1, and 1:3) were fabricated using the cold spraying technique. Penetration experiments were conducted against underwater spaced plates, concrete targets, and semi-infinite steel targets using Ni-Al reactive jets. 3D scanning techniques were employed to comparatively analyze the penetration depth, aperture diameter, and target deformation, systematically investigating the effects of Ni/Al molar ratio on the damage capabilities of underwater Ni-Al reactive jets. The results indicate that the Ni/Al molar ratio significantly influences the damage effects of the jets on different types of underwater targets. As the Al content increases, the kinetic penetration depth of the jet decreases, while the damage effect caused by chemical energy release increases. At a molar ratio of 1:1, the Ni-Al jet achieves a balance between kinetic penetration depth and chemical energy damage, exhibiting the optimal comprehensive damage capability. This study provides a theoretical basis and data support for the design of efficient underwater warheads utilizing reactive materials.


DOI
10.12783/ballistics26/37746

Full Text:

PDF

Refbacks

  • There are currently no refbacks.