Open Access Open Access  Restricted Access Subscription Access

MECHANICAL RESPONSE AND EFFECT OF LAYERING OF AA2024T3 UNDER FSP IMPACT

Tom Gerlache, Georgios Kechagiadakis, Wim Van Paepegem, David Lecompte

Abstract


This study investigates the ballistic performance of monolithic, double-, and multilayer AA2024-T3 plates with a total thickness of up to 6 mm subjected to 5.56 mm Fragment Simulating Projectile (FSP) impact. An experimental campaign on a 6 x 1 mm configuration established a ballistic limit of 460.3 m/s and revealed combined shear and tensile failure in the rear plate. The results were used to calibrate a finite element model for investigating the influence of in-contact layering. Three failure regimes were identified for monolithic plates, with transitions at 3 mm and 1.5 mm. Layering was found to improve ballistic performance only in shear-dominated regimes by reducing plate stiffness. For a total thickness of 6 mm, uniform double layering provided the greatest improvement, while further subdivision into three 2 mm plates increased the ballistic limit by 25.9% relative to the monolithic configuration.


DOI
10.12783/ballistics26/37751

Full Text:

PDF

Refbacks

  • There are currently no refbacks.