FRAGMENTATION OF A M42 SHAPED CHARGE AND ITS JET PENETRATION INTO CONCRETE
Abstract
This study investigates the response of high-strength concrete targets to M42 shaped-charge loading as a function of stand-off distance, with the aim of aiding protective-material assessment. Experiments examined jet penetration and fragment distributions for high- strength concrete targets (cube compressive strength 56.3 MPa), extending earlier work with steel targets. Ten stand-off distances from 17.5 to 250 mm were tested using 3D‑printed tripods. The penetration depth increases with stand-off distance up to approximately 100 mm and decreases at larger stand-offs, consistent with established shaped charge behaviour. Downward fragment impacts were recorded on aluminium witness plates. The fragment mass distribution was studied in a water-basin recovery experiment. The recovered fragments were described reasonably well by both a generalised Mott distribution and, slightly better, by a generalised Grady distribution. Future work will extend the study to other target materials and further examine the applicability and limitations of fragment-distribution models for pre- fragmented shaped charges.
DOI
10.12783/ballistics26/37755
10.12783/ballistics26/37755
Refbacks
- There are currently no refbacks.