Open Access Open Access  Restricted Access Subscription Access

PERFORMANCE OF SHAPED CHARGES MADE USING DIFFERENT HIGH-EXPLOSIVE MANUFACTURING METHODS

Andreas Helte, Emil Karlsson, Jonas Lundgren, Alexander Palfelt

Abstract


Resonant acoustic mixing (RAM) can be used to cure cast explosives directly into the mould, saving time and potentially allowing higher solid loading. To assess the suitability of RAM in shaped charge applications, a study was conducted using three different methods to create shaped charges: isostatic pressing, melt-casting, and RAM. The charge geometry and liner remained consistent across charges; however, the high-explosive type varied, as each method necessitated different explosive materials. Two charges of each type were fired and the resulting jets were analyzed. The experiments demonstrated that RAM is capable of producing uniform charges without visible pores. The charges fabricated using RAM exhibited performance comparable to those produced by isostatic pressing and surpassed the performance of the melt-cast charges utilized in this study. The RAM-results are promising, and optimizing processing parameters might improve performance further.


DOI
10.12783/ballistics26/37691

Full Text:

PDF

Refbacks

  • There are currently no refbacks.