PENETRATION PERFORMANCE AND JET FORMATION IMAGING OF ADDITIVELY MANUFACTURED COPPER-POLYMER COMPOSITE CONICAL SHAPED CHARGE LINERS
Abstract
Under the extreme strain rates associated with shaped-charge collapse, small variations in liner density, geometry, and microstructure can significantly affect jet formation and penetration performance. Conventional liners are commonly manufactured from monolithic copper using precision machining or metal-forming processes, which can increase production costs and restrict rapid design iteration. Material-extrusion additive manufacturing offers a lower-cost alternative for producing copper-polymer composite liners; however, the performance of these materials under shaped-charge loading remains largely unexplored. This study compares conventionally manufactured copper liners with green-state additively manufactured liners produced from a composite containing approximately 88 wt.% copper particles in a polylactic acid binder. Two AM designs were evaluated: a geometry-equivalent liner that reproduced the conventional liner geometry as closely as permitted by the printing process and a copper-mass-equivalent liner with increased composite volume to match the estimated copper mass of the conventional liner. Penetration testing and high-speed imaging were used to evaluate the effects of composite structure and design methodology on terminal performance and jet formation. The results establish an experimental baseline for green-state copper-polymer shaped-charge liners and assess the feasibility of additive manufacturing as a method for rapid liner fabrication, controlled geometric variation, and future material optimization.
DOI
10.12783/ballistics26/37692
10.12783/ballistics26/37692
Refbacks
- There are currently no refbacks.