DESIGN OF MULTI-LAYER SOFT CATCH SYSTEMS FOR BALLISTIC IMPACT
Abstract
During ballistic testing, characterization of the post-test projectile requires that it is not further damaged as it comes to rest after testing. This requires some sort of soft catch system beyond the back surface of the target that is designed to gently decelerate the projectile without imparting excessive forces on the projectile. Characterization test data from urethane foams were used to create material models for use in impact simulations, which were validated against impact data using 0.30-cal. projectiles. Based on these results, a methodology was developed that allowed for the design of soft catch systems comprised of various foam sections with different compositions and lengths. Soft catch systems were then designed to decelerate 0.50-cal. steel cylinders and monolithic brass projectiles with initial speeds of up to 1000 m/s. The soft catch targets were successful in allowing for the recovery of undamaged projectiles, and the measured depth of penetration was within 10% of the predicted value using the soft catch design methodology in most experiments.
DOI
10.12783/ballistics26/37720
10.12783/ballistics26/37720
Refbacks
- There are currently no refbacks.