STUDY ON THE CRITICAL CRITERIA FOR IGNITION AND DETONATION OF CASED MELT-CAST TNT
Abstract
To utilize a shaped charge jet for ignition and destruction of unexploded ordnance, molten TNT was used as a typical charge. By combining experiments and simulations, shaped charge impact initiation tests were conducted, and a finite element model was established using numerical simulation software. The jet impact on cased charges was theoretically derived, and the mechanism and criteria for the shaped charge jet penetrating the casing to ignite/detonate the rear charge were studied. The results show that the simulation matches the experimental results well. In experiments, the critical 45-steel thickness for deflagration-to- detonation of cased molten TNT was 72 mm, and the critical 45-steel thickness for non- reactive-to-deflagration was 87 mm. When the jet energy density (J/m²) is in the range of 490–738, and the sensitivity coefficient K (10³ m³·s⁻²) in the Held criterion is between 16.99 and 21.75, cased molten TNT achieves stable combustion, thus ensuring safe destruction.
DOI
10.12783/ballistics26/37752
10.12783/ballistics26/37752
Refbacks
- There are currently no refbacks.