Open Access Open Access  Restricted Access Subscription Access

EFFECTS OF ENTRANCE-PLATE MATERIAL AND THICKNESS ON THE FRAGMENTATION AND ENERGY RELEASE OF HfZrTiTa0.2Al0.8 HIGH-ENTROPY ALLOY ENERGETIC STRUCTURAL MATERIAL UNDER BALLISTIC IMPACT

Zheng Tian, Rui Liu, Yansong Guo, Pengwan Chen

Abstract


Energetic structural materials (ESMs) combine structural strength with additional chemical energy release under high-velocity impact. This study examined how entrance-plate material and thickness affect the fragmentation and energy release of HfZrTiTa0.2Al0.8 energetic high-entropy alloy. The alloy showed a dynamic compressive strength of about 1.7 GPa and a failure strain of about 0.04. At similar impact velocities, thicker entrance plates produced higher peak quasi-static pressure (QSP), larger luminous regions, and more dispersed damage on the steel anvil. Steel plates generally caused greater fragmentation and higher QSP than aluminum plates of the same thickness. Calculations showed that plate material affected the interface pressure, while plate thickness mainly controlled the loading duration. As impact velocity increased from 1000 to 1400 m/s, the characteristic fragment size decreased from 0.654 to 0.498 mm, while peak QSP increased from 0.32 to 0.67 MPa. Smaller, more dispersed fragments were therefore associated with stronger energy release.


DOI
10.12783/ballistics26/37754

Full Text:

PDF

Refbacks

  • There are currently no refbacks.